1594固化剂 主要技术指标： 外 观：淡黄色粘稠液体 色 号：2（加德纳法） 胺 值：600-700mgKOH/g 使 用：每100g E-44型环氧树脂配比为22-28g，可使用时间25℃为10分钟。适用于模具浇铸、粘胶...

4500A (P) / 4500B (P) system-component packaging materials, insulation, low stress, good resistance to thermal shock characteristics and stable electrical performance at room temperature or low temperature curing. Second, the conventional p...

Ignition coil epoxy 9001A / B For engine ignition coil potting, with excellent impregnation, electrical insulation and heat resistance. Features: (1) This series of resin with excellent mechanical, electrical performance. (2) has a good hea...

Competition (Tour) boats, surfboards, skis and sports equipment, epoxy resin airplane model 5010-5A / B I. Introduction: 5010-5A/5010-5B Department of transparent epoxy resin potting material, a mixture of low viscosity, can be used for a l...

固化剂（改性脂环胺-8221） 产品指标： 类型 ： 脂环胺加成物 粘度 (mPa.s/25℃) 70-180 胺值 (mg KOH/g) 315-345 色泽 (Gardner) 2 比重 (25℃) 1.02 固含量 (%) - 活性氢当量 89 使用量 (phr) 50 胶化时间...

Specification: Type: cycloaliphatic amine adduct Viscosity (mPa.s/25 ℃) 70-180 Amine value (mg KOH / g) 315-345 Color (Gardner) 2 Gravity (25 ℃) 1.02 Solid content (%) - Active hydrogen equivalent of 89 Usage (phr) 50 Gel time (min/150g...

Epoxy curing agent in the primer x-50(Cardanol modified） Is a unique epoxy curing agent. The curing agent can be used as the basis of filling, pouring, electronic potting, concrete floor at the end, the special anti-corrosion coating and...

The fluorocarbon resin is CTFE, vinyl compounds, quaternary enolase and acid copolymer, in the harsh temperature, chemical and strong ultraviolet radiation environment, with a fluorine polymer stability and balanced physical properties. For...

Automotive Ignition coil epoxy 9001A / B For engine ignition coil potting, with excellent impregnation, electrical insulation and heat resistance. Features: (1) This series of resin with excellent mechanical, electrical performance. (2) has...

改性酸酐固化剂（H-3177） 一、简介： H-3177环氧树脂硬化剂是改性 酸酐 ，粘度低，毒性小，硬化物机械性能，耐热性能，电气绝缘性能极性。与E-51固化耐温可达到150度以上。 二、常规...